Office: (314) 241-5333
Sales Hours
Mon - Fri: 08:00AM - 05:00PM
Saturday: Closed
Sunday: Closed
Adress
5737 W Park Ave
St. Louis, MO 63110
English
Aluminum Oxide Blast Media
Why Aluminum Oxide Blast Media? It is among the hardest abrasive available and its great on new and coated steel.
Aluminum Oxide Blasting Media
- Brown Aluminum Oxide Blast Media is among the Hardest Abrasive available (only Diamond is harder)
- Recycle 4 to 7 times
- New and coated steel
- Environmentally Friendly Abrasive
- No detectable silica
- Extremely low dust
- Very low consumption rate on new steel (~ 1 to 2 lbs/sq. ft. at 110psi Nozzle)
- Low embedment
- Available in 50 & 400 lb Fiber Drums & 2000 lb Bulk Bags
- Tech Data Sheet (PDF)
- SDS (PDF)
Technical data
-
Abrasive TypeAluminum Oxide
-
ShapeAngular/Sharp
-
Bulk Density (lbs/cu.ft.)115 to120 lbs/cu.ft.
-
Specific Gravity3.9 g/cc
-
MOH Hardness9
-
Crystalline Silica ContentNone Detectable
-
Potential for EmbedmentVery Low (~1%)
-
Dust LevelsVery Low
-
Abrasive Fracture PotentialVery Low
-
Chloride Content~ 0 ppm
-
SSPC SP-10 Near White (over new steel Rust Grade A/B)-
-
Production Rate (sf/hr)500+ sf/hr
-
Consumption Rate (lbs/hr)400 lbs/hr
-
Consumption Rate (lbs/sf)1 to 2 lbs/sf
-
# of Recycles4 to 7
-
Material Cost per sf : w/o Recycles (StL)$0.60/sf
-
Material Cost per sf: w/ Recycles (StL)$0.38/sf
-
Cost per Ton (FTL to StL)$1200 (Freight ~$85/ton)
-
QPL (< 1% Silica & < 3% Cl)MIL-A-22262 (SH)
-
Disposal Cost per Ton~$110/ton
-
ColorBrown/Gray
