Office: (314) 241-5333
Sales Hours Mon - Fri: 08:00AM - 05:00PM Saturday: Closed Sunday: Closed
Adress 5737 W Park Ave St. Louis, MO 63110

JetMag

Why JetMag? It has a low cost per square foot on new steel and has a low dust rate.

JetMag

  • Low cost per square foot abrasive for new steel
  • Low dust
  • High production rate for new steel
  • Very Low consumption rate on new steel (~ 2 lbs/sf)
  • Very low embedment
  • Low Density means more abrasive particles per lb
  • Recycle up to 2 to 3 turns
  • Available in 55 lb bags, 3000 lb SuperSacs
  • Tech Data Sheet (PDF)
  • SDS (PDF)
Please contact us or call at 314-241-5333 for additional information
Technical data
  • Abrasive Type
    Sintered Olivine
  • Shape
    Angular
  • Bulk Density (lbs/cu.ft.)
    78 lbs
  • Specific Gravity
    2.8
  • MOH Hardness
    7 to 7.5
  • Crystalline Silica Content
    < 0.1%
  • Potential for Embedment
    Low (< 5%)
  • Dust Levels
    Low
  • Abrasive Fracture Potential
    Low
  • Chloride Content
    1 ppm
  • —SSPC SP-10 Near White (over new steel Rust Grade A/B)
    -
  • Production Rate (sf/hr)
    350 sf/hr
  • Consumption Rate (lbs/hr)
    500 lbs/hr
  • Consumption Rate (lbs/sf)
    2 to 4 lbs/sf
  • # of Recycles
    2 to 3
  • Material Cost per sf : w/o Recycles (StL)
    $0.54/sf
  • Material Cost per sf: w/ Recycles (StL)
    $0.39/sf
  • Cost per Ton (FTL to StL)
    $425 (Freight $130)
  • QPL (< 1% Silica & < 3% Cl)
    meets requirements
  • Disposal Cost per Ton
    $100/ton
  • Color
    Charcoal Brown
 Save as PDF