Office: (314) 241-5333
Sales Hours
Mon - Fri: 08:00AM - 05:00PM
Saturday: Closed
Sunday: Closed
Adress
5737 W Park Ave
St. Louis, MO 63110
English
Black Beauty Iron Copper Slag
Why Black Beauty Iron Copper Slag? It is among the lowest cost per square foot abrasive and it has a very low consumption rate on new steel.
Black Beauty Iron Copper Slag
- Among the lowest cost per square foot abrasive
- New and coated steel
- Environmentally Friendly Abrasive – no beryllium
- Extremely low dust
- Very low consumption rate on new steel (~ 1 to 2 lbs/sq. ft. at 110psi Nozzle)
- Low embedment
- Recycle 2 to 3 times
- Available in 50 & 100 lb bags, 3000 & 4000 lb Bulk Bags, Bulk & Rail
- Tech Data Sheet (PDF)
- SDS (PDF)
Technical data
-
Abrasive TypeIron Silicate
-
ShapeUniform Angular
-
Bulk Density (lbs/cu.ft.)110 to 120 lbs/cu.ft.
-
Specific Gravity3.8 g/cm3
-
MOH Hardness7
-
Crystalline Silica Content< 0.1%
-
Potential for EmbedmentLow (~4%)
-
Dust LevelsLow
-
Abrasive Fracture PotentialLow
-
Chloride Content0 to 5 ppm
-
SSPC SP-10 Near White (over new steel Rust Grade A/B)-
-
Production Rate (sf/hr):450+ sf/hr
-
Consumption Rate (lbs/hr):700 lbs/hr
-
# of Recycles:2 to 3
-
Material Cost per sf : w/o Recycles (StL)$0.32/sf
-
Material Cost per sf: w/ Recycles (StL)$0.28/sf
-
Cost per Ton (FTL to StL)$310 (Freight ~$120/ton)
-
QPL (< 1% Silica & < 3% Cl)MIL-A-22262 (SH)
-
Disposal Cost per Ton~$100/ton
-
ColorBlack
