Articles
- August 7, 2018
- Posted by: Keith Gabbard
- Category: Abrasive Safety
OSHA recently enacted the revised Beryllium Standard for airborne exposure to trace amounts of Be (Beryllium). The original intent was to regulate airborne exposures of Be present in Be production facilities where levels are necessarily quite high. At the last minute of the OSHA Be revision process included the Blast Abrasives industry in the revised…
Save as PDF- June 30, 2018
- Posted by: Keith Gabbard
- Category: Abrasive Knowledge
Blast Abrasives delivered costs are shooting up! 2018 is turning out to be an exceptional year – in terms of cost increases for Abrasives. Not necessarily the cost of the Abrasive itself, but coupled with the Delivery cost, we are experiencing increases anywhere from 20% to 40% in landed cost compared to 2017. Why the…
Save as PDF- May 6, 2018
- Posted by: Keith Gabbard
- Category: Abrasive Safety
“We will keep using it until we get caught”. This is a typical response we get when approaching Blast Operations that still utilize silica sand (beach sand, Ottawa flint, river sand, Meramec sand, etc.). At issue with any of the silica sands chosen as a blast abrasive is the inevitable elevated level of Airborne Silica…
Save as PDF- April 22, 2018
- Posted by: Keith Gabbard
- Category: Abrasive Knowledge
What is my cost per ton? What is my cost per bag? This is typically the first question asked when approached with the offering of another Abrasive option for Blast Operations. TCR Blast Abrasives contends the more relevant question is: What is my cost per square foot? The lowest cost per square foot Abrasives are…
Save as PDF- July 15, 2016
- Posted by: Keith Gabbard
- Category: Abrasive Safety
The final rule is now in force per OSHA Standard for Silica Dust Exposure. Below is an excerpt that will be the main issues for Abrasive Blast operations. “The final rule also includes key provisions that require employers to: Use engineering controls (such as water, ventilation, or non-silica substitute) and work practices to limit worker…
Save as PDF- November 26, 2014
- Posted by: Keith Gabbard
- Category: Uncategorized
The current state of the handling of spent coal slag (CCR – Coal Combustion Residue) may be changing soon (Dec. 19, 2014 ruling). A federal judge mandated regulation ruling by the Federal EPA is coming soon, after over four years past the original proposal. The EPA has until Dec 19th, based on a court order, to…
Save as PDF- December 13, 2013
- Posted by: Keith Gabbard
- Category: Abrasive Safety
The American Cancer Society has released a new study that millions could benefit from a federal proposal to limit silica exposure. “New studies have also shown that excess lung mortality occurs in silica-exposed workers who do not have silicosis and who do not smoke,” says the article, by Kyle Steenland, PhD, and Elizabeth Ward, PhD….
Save as PDF- December 11, 2013
- Posted by: Keith Gabbard
- Category: Abrasive Safety
Public comment has been invited by OSHA regarding potential revisions to their Process Safety Management standard along with other policy options that help prevent major chemical releases and other accidents. Also, they are seeking input on possible updates for three other standards, including the Explosive and Blasting Agents standard. President Obama signed the executive order…
Save as PDF- November 27, 2013
- Posted by: Keith Gabbard
- Category: Abrasive Safety
A new fact sheet has been posted at OSHA.gov regarding the changes for the Hazard Communication Standard. This will most likely affect the blasting industry most directly in the training of employees on the new updates. Building on the success of OSHA’s current Hazard Communication Standard, the GHS is expected to prevent injuries and illnesses,…
Save as PDF- November 27, 2013
- Posted by: Keith Gabbard
- Category: Abrasive Safety
In an article posted on PaintSquare.com, we are seeing that changes are coming regarding coal ash and EPA regulations. A judge is giving the agency a time frame to complete revisions of the regulations regarding coal ash. Whatever this ruling, it will have implications on your blast abrasives safety plan. Hazardous or Not? At the…
Save as PDF